Drilling Machine Spares Down The Hole Hammer 6 Inch Shank M60
It has the following advantages:
1. Out of the trouble of foot valve fracture and expansion and
2. Lower energy consumption and higher impact frequency. The
drilling speed is 15-30% higher than the one with foot valve;
3. Simple structure, reliable parts, long life, easy and cheap
4. Lower air and oil consumption, the oil consumption is about 10%
lower than the one with foot valve.
According to your request, the top sub can be made into two
spanners, an air controlling hole can be drilled on the check valve
to provide more efficient cuttings discharge.
|Length (less bit)||1161mm|
|Top sub thread||API 3 1/2" REG pin|
|Weight (less bit)||96kg (211lbs)|
|Impact rate at 1.7 Mpa||25Hz|
|Recommended rotation speed||20-30 r/min|
|Air consumption at 7-14 bar||350-1006 CFM|
DTH bits 155-190mm for above hammers can be available.
Our HM serises DTH hammer specifications:
|DTH hammer type||HM30||HM40||HM50||HM60||HM80|
|Length(less bit) mm||930||1005||1084||1161||1300|
|Weight(less bit) kg||25kg (55lbs)||40kg(88lbs)||40.5kg(89lbs)||96kg(210lbs)||175kg(374lbs)|
|External diameter mm||Φ82mm||Φ99||Φ99||Φ99||Φ185|
|Connection thread||API 2 3/8" Reg.||API 2 3/8"Reg||API 2 3/8"Reg||API 2 3/8"Reg||API 4 1/2"Reg|
|Impact rate at 1.5-1.7Mpa||30Hz||30Hz||28Hz||25Hz||22Hz|
|Recommended Rotation speed||25-40r/min||25-40r/min||25-40r/min||20-30r/min||15-25r/min|
Act as a good adviser and assistant of clients enable them to get
rich and generous returns on their investments . 1.Select equipment
model. 2.Design and manufacture products according to client's
special requirement ; 3.Train technical personnel for clients .
2.Services during the sale:
1.Pre-check and accept products ahead of delivery .
2. Help clients to draft solving plans .
Provide considerate services to minimize clients' worries.
1.Complete After-sales service,professional engineers available to
service machinery at home or oversea.
2. 24 hours technical support by e-mail.
3.Other essential technological service.